VPI Industries JMW-9T Bedienungsanleitung PDF herunterladen (Seite 5)

Unpacking the Box

The turntable and tonearm are packed very carefully in box A to avoid damage during

shipping. It is important that you save the packing materials and box to use for shipping or

moving the SSM.

1. Remove the cardboard.

2. Set aside the bag containing the drive belt.

Complete and return the warranty card. The warranty

does not take effect until the warranty card is returned.

3. Remove and set aside the items in the next layer:

o JMW Memorial Alignment Jig.

o Record weight.

o Power cord.

o Bag containing screwdrivers and screws for mounting the cartridge.

4. Remove the pieces of foam covering the tonearm, then carefully remove the tonearm

and set it down in a safe place. Use caution with the tonearm’s delicate wires and Lemo

connector.

5. Remove the foam pieces that surround the chassis. Lift one side of the turntable chassis,

slide off the plastic bag, then do the same with the other side of the chassis.

6. Remove the turntable chassis from the box.

7. Open Box B and remove the platter, motor-flywheel assembly, flywheel, and ring clamp.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

VPI Industries JMW-9T Bedienungsanleitung Seite 5